What is this?
Part P of the Building Regulations (England and Wales) requires that most electrical work in dwellings is either carried out by a registered competent person (who can self-certify) or notified to the local Building Control body. Work that falls under Part P includes new circuits, consumer unit changes, work in bathrooms and kitchens, and outdoor electrical installations. Non-notified work is technically a building regulations breach.
Common causes
- Electrician who was not registered with a competent person scheme carried out notifiable work without notifying Building Control
- DIY electrical work on notifiable circuits without Building Control involvement
- Kitchen or bathroom electrical work done without realising it was notifiable
- Consumer unit replacement done without Part P notification
- Garden or outdoor electrical installation without proper certification
Is it dangerous?
Non-compliance with Part P does not necessarily mean the work is unsafe, but it does mean the work has not been independently verified. The danger depends on the quality of the work done. Improperly installed circuits can have inadequate protection, incorrect cable sizing, or missing earthing — all of which are fire and shock risks.
Can I fix it myself?
You cannot self-certify Part P work retrospectively. The options are to have the work inspected and tested by a registered electrician who can then notify Building Control, or to apply to your local council for a retrospective Building Regulations application (regularisation certificate). The council will send a Building Control inspector to check the work.
When to call an electrician
Call a registered electrician (one who is part of NICEIC, NAPIT, ELECSA, or another competent person scheme) to inspect and test the non-compliant work. They can assess whether the work meets current standards and, if it does, may be able to certify it. If it does not meet standards, they can carry out the necessary remedial work and then certify it.
What will an electrician do?
Inspect and test the non-compliant electrical work against current standards
Identify any defects or areas that do not meet BS 7671 requirements
Carry out remedial work to bring the installation up to standard
Issue the appropriate electrical certificates (EIC or MEIWC)
Notify Building Control through their competent person scheme registration
Provide you with formal certification for your records
Typical cost
£150 – £500
Inspection and testing of existing work: £150–£250. Remedial work varies depending on what needs correcting. A regularisation certificate from Building Control costs around £250–£500 if you go that route.


