Skip to main content
Sparky
Log inSign up

Lights Are Too Dim

Your lights are on but noticeably dimmer than they should be — not bright enough to light the room properly.

£60 – £180Low Risk

What is this?

Lights that are consistently dim (not flickering, just not bright enough) can be caused by incorrect bulbs, a failing power supply to the fitting, voltage issues, or wiring faults reducing the power reaching the bulb. This is different from flickering — the lights stay on but are underwhelming.

Common causes

  • Wrong bulb wattage or lumen output for the fitting and room size
  • Dimmer switch set too low or dimmer not fully compatible with the bulb type
  • Low supply voltage to the property (below the 207V lower limit of the 230V ±10% range)
  • Corroded or loose connections reducing voltage at the fitting
  • Ageing dimmer switch with worn components not delivering full power
  • Failing LED driver or transformer not providing enough current

Is it dangerous?

Dim lights are generally not dangerous in themselves. However, if lights that used to be bright have gradually become dim, it could indicate deteriorating connections or a voltage problem that should be investigated. Consistently low voltage can also damage motor-driven appliances.

Can I fix it myself?

Check that you have the correct bulb — look at the lumen rating (brightness) rather than just wattage. For LEDs, you need far fewer watts for the same brightness as an old incandescent bulb. If you have a dimmer, make sure it is turned up fully and is compatible with your bulbs. Try a new bulb from a reputable brand.

When to call an electrician

Call an electrician if replacing the bulb does not help, if all lights in the house seem dim, if the dimness has developed gradually over time, or if appliances also seem sluggish. These can all indicate a voltage or connection issue that needs professional diagnosis.

What will an electrician do?

1

Measure the supply voltage at the consumer unit and at light fittings

2

Check all connections on the lighting circuit for looseness or corrosion

3

Test the dimmer switch output and replace if faulty

4

Assess whether the incoming supply voltage is within specification

5

Replace corroded connections or aged wiring as needed

Typical cost

£60 – £180

Simple dimmer or connection fixes are at the lower end. If the issue is low supply voltage, the DNO investigation is free but may take time.

Find a Local Electrician

Need a qualified electrician? Browse all London electricians or find one in a borough near you.

CroydonBromleyHaveringEnfieldEalingSuttonBarnetHillingdonBrentBexleyRedbridgeHounslowWaltham ForestMertonLewishamKingston upon ThamesEpping ForestBarking and DagenhamNewhamWandsworthLambethHaringeyGreenwichRichmond upon ThamesCamdenSpelthorneHackneyIslingtonElmbridgeTower HamletsSouthwarkWestminsterHarrowHammersmith and FulhamBrentwoodTandridgeReigate and BansteadKensington and ChelseaEpsom and EwellCity of LondonBuckinghamshireThurrockSevenoaksBroxbourne

Related Problems

Flickering & Dimming Lights

Lights Dim When An Appliance Turns On

Your lights momentarily dip or dim whenever you switch on a high-power appliance like a kettle, washing machine, or electric shower.

Medium Risk
Flickering & Dimming Lights

Dimmer Lights Flickering

Lights on a dimmer switch are flickering, strobing, or not dimming smoothly.

Low Risk
Flickering & Dimming Lights

Lights Suddenly Brighter Than Normal

Your lights have become noticeably brighter than normal — bulbs are glowing intensely or seem over-powered.

High Risk
Light Switch & Lighting Problems

Dimmer Switch Not Working

Your dimmer switch has stopped working — it will not dim the lights, or the light flickers, buzzes, or does not come on at all.

Low Risk

Sources & References

Frequently Asked Questions

Why are my lights not as bright as they should be?
The most common cause is using bulbs with insufficient lumen output for the room. When replacing incandescent with LED, check the lumen rating — a 60W incandescent is about 800 lumens, so you need an LED rated at 800 lumens, not just any LED.
Can a dimmer switch make lights dim even at full?
Yes. An old or incompatible dimmer may not pass full voltage to the bulb, even at the highest setting. LED-compatible trailing-edge dimmers are recommended for modern LED bulbs.
Could low voltage cause my lights to be dim?
Yes. UK mains voltage should be 230V ±10% (207V to 253V). If your supply drops below this range, lights will be noticeably dimmer. An electrician can test this and contact the DNO if needed.
Should I be worried if lights have gradually become dimmer?
Gradual dimming over weeks or months can indicate deteriorating connections building up resistance. This should be investigated as it can lead to overheating.

Need help with this?

Book an Electrician

It's easier in the app

Download Sparky to request help, track your electrician, and pay securely — all from your phone.

Download on the App StoreGet it on Google Play
Track your confirmed electrician booking in the Sparky app