Free Template

Void Property Electrical Checklist

Electrical safety checklist for void and empty rental properties covering isolation, re-energisation, testing requirements, and pre-let compliance checks. Free PDF download.

PDF · 165 KB

Download Free

What Is It?

A void property electrical checklist is a step-by-step inspection and verification document used during the void period between tenancies. It covers everything from the initial safe isolation of the property when the outgoing tenant leaves, through visual inspection, testing, remedial work, and final sign-off before re-letting. It is designed to be completed by a qualified electrician or competent maintenance operative and provides a documented audit trail of all electrical safety checks carried out during the void works process.

About This Template

Void periods — the time between one tenancy ending and the next beginning — present unique electrical safety challenges. Properties may have been left with appliances plugged in, heating systems drained, or damage that creates electrical hazards. For social housing providers, local authorities, and private landlords managing turnarounds, a structured electrical checklist ensures that every void property is safe to re-let and compliant with current regulations before a new tenant moves in. This template follows best practice from the Electrical Safety First guidelines and aligns with the requirements of the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020.

When to Use

When a tenant vacates a rental property and the property enters a void period before re-letting
During planned void works programmes for social housing providers and housing associations
When taking on management of a previously unmanaged or abandoned property
After a property has been empty for an extended period (3 months or more) and the electrical installation needs verification before re-energisation
When insurance requires confirmation that a void property has been electrically inspected before a new policy or tenancy begins

What to Include

Property identification: address, property type, void start date, and expected re-let date
Initial isolation check: confirmation that the supply has been safely isolated or left in a known safe state by the outgoing tenant or operative
Visual inspection of the consumer unit: check for signs of overheating, loose connections, water ingress, or tampering
Visual inspection of all accessible wiring, sockets, switches, and light fittings for damage, missing covers, exposed conductors, or signs of DIY alterations
Check for tenant-installed equipment that may need removal: satellite dishes, additional sockets, extractor fans, or electric showers not installed by a qualified person
Smoke and carbon monoxide alarm testing: confirm all alarms are present, correctly located, and functioning as required by the Smoke and Carbon Monoxide Alarm (Amendment) Regulations 2022
Meter and supply check: verify the meter is accessible, the supply type matches records, and prepayment meters are not in debt or tampered with
EICR status review: confirm the current EICR is valid (within 5 years) or schedule a new inspection if due
Remedial work log: list of any defects found, work carried out, and confirmation of completion with electrician's details
Final sign-off: confirmation the property is electrically safe for re-letting, signed and dated by the responsible person

Tips

Complete the electrical checklist as one of the first void works tasks — do not leave it until decorating is finished, as electrical faults can damage new finishes and delay the turnaround

Always check behind furniture, in cupboards, and in loft spaces during void inspections. Previous tenants may have carried out unsafe DIY work that is only visible when the property is empty

If the property has been empty for more than 3 months, treat the re-energisation carefully — insulation resistance can degrade in damp, unheated properties, and switching everything on at once can trip RCDs or cause faults

Photograph the meter reading and consumer unit at both the start and end of the void period for your records. This protects against disputes about energy use during the void

For housing associations and larger landlords, integrate this checklist into your void works management system so that electrical sign-off is a mandatory gate before the property can be marked as available for re-let

Related Templates

Landlord Electrical Compliance Checklist

Comprehensive landlord electrical compliance checklist covering EICR scheduling, tenant notification duties, remedial work tracking, and record keeping. Free PDF download.

PDF · Free

EICR Report Template

Electrical Installation Condition Report (EICR) template following BS 7671 standards. Includes all required sections and observation codes. Free PDF download.

PDF · Free

Find a Local Electrician

Need a qualified electrician? Browse all London electricians or find one in a borough near you.

Frequently Asked Questions

Should the electricity supply be left on or turned off during a void period?

This depends on the circumstances. For short void periods (a few weeks), it is usually best to leave the supply on but ensure all tenant appliances are removed and circuits are safe. For longer voids, especially in winter, consider leaving the supply on to power frost protection heating, security lighting, or alarm systems. If the property will be empty for several months with no monitoring, isolating the supply reduces the risk of undetected faults. Always ensure the consumer unit is accessible and clearly labelled.

Do I need a new EICR for every void period?

Not necessarily. If the existing EICR is less than 5 years old and the property has not had significant alterations, the current certificate remains valid. However, a visual inspection during the void works process is still essential to check for any damage caused by the outgoing tenant. If the EICR is due to expire within 6 months, it makes sense to arrange a new one during the void period when access is easy and there is no disruption to tenants.

What are the most common electrical issues found in void properties?

The most common issues include damaged sockets and switches (from furniture removal), missing light fittings or exposed wiring where tenants have removed their own fixtures, DIY electrical additions (extra sockets, light fittings, or extractor fans installed without proper certification), tampered consumer units, and non-functioning smoke alarms. In properties that have been empty for a long time, dampness can also cause insulation resistance failures.

Who should complete this checklist?

The visual inspection portions can be completed by a trained maintenance operative, but any testing, remedial work, or sign-off of the electrical installation should be carried out by a qualified electrician registered with a competent person scheme (NICEIC, NAPIT, or ELECSA). For social housing providers, the checklist is typically completed collaboratively between the voids maintenance team and the electrical contractor.

Is there a legal requirement for electrical checks during void periods?

There is no specific regulation that mandates electrical checks during every void period. However, landlords have a general duty of care under the Landlord and Tenant Act 1985 and the Defective Premises Act 1972 to ensure properties are fit for habitation. The Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020 require a valid EICR to be provided to new tenants before they move in. Carrying out a void electrical checklist is best practice to fulfil these duties and demonstrates due diligence.

Grow your business