Socket & Plug Installation in Camden

About socket & plug installation in Camden

Adding or relocating a power socket involves running a new spur or radial circuit from an existing circuit or consumer unit, mounting the back box, and connecting to the ring main or radial. Whether you need extra sockets in a kitchen, USB charging points in a bedroom, or a weatherproof outdoor socket for the garden, the work must be carried out safely and to current wiring standards. A qualified electrician ensures the circuit can handle the additional load and that the installation meets BS 7671.

Adding a new socket circuit or extending an existing one is notifiable electrical work under Part P of the Building Regulations when it involves work in kitchens, bathrooms, or outdoors. Even in other rooms, electrical work must comply with BS 7671. Overloading circuits with extension leads and adapters is a leading cause of domestic electrical fires in the UK — properly installed sockets eliminate this risk.

What's included

• Assessment of existing circuit capacity
• Supply and installation of socket (single, double, or USB type)
• Cable run from feed point to new socket location
• Flush or surface-mounted back box installation
• All cable, fixings, and connector blocks
• Circuit testing to BS 7671 standards
• Minor Electrical Installation Works Certificate (MEIWC)
• Part P Building Control notification where required

Typical cost

Socket & Plug Installation in Camden typically costs £80–£200 per socket. Every job is different — describe what you need and a qualified electrician will quote you directly.

See full pricing breakdown →

Regulations & standards

• Part P of the Building Regulations (Approved Document P): Socket installation in kitchens, bathrooms, and outdoors is notifiable work. It must be carried out by an electrician registered with a competent person scheme, or inspected by Building Control.
• BS 7671:2018+A2:2022 (IET Wiring Regulations): All socket installations must comply with the current edition of the Wiring Regulations, covering circuit design, cable sizing, protection, and safe zones for cable routes.
• IET Guidance Note 1 — Selection and Erection: Provides detailed guidance on socket outlet positioning, spacing, and installation methods, including minimum heights and distances from heat sources and water.